View our Christmas opening hours here

22 May 2026

F-Gas Regulations in Refrigeration: What UK Businesses Need to Know

Compliance, Phase-Down Targets and Low GWP Refrigerant Solutions

Image of F-Gas Regulations in Refrigeration: What UK Businesses Need to Know

F-Gas regulations are reshaping refrigeration across the UK. For businesses operating in commercial and transport refrigeration, they are no longer just a regulatory requirement. They directly influence how systems are designed, maintained and future proofed.

With stricter controls on high Global Warming Potential (GWP) refrigerants and a continued HFC phase-down, understanding F-gas compliance in refrigeration is now essential for avoiding risk, controlling costs and planning ahead.

The UK is currently consulting on the next phase of F-gas reduction legislation. The proposed changes will form part of the Climate Change Act and are currently under review by DEFRA. Several reduction scenarios have been outlined, with the preferred option being a high-ambition proposal targeting a 98.6% reduction in F-gases by 2048.

The new legislation is expected to come into effect from January 2027. While the final details are still being confirmed, one thing is already clear: high GWP F-gases are likely to become increasingly expensive and harder to source.

Even under the current F-gas regulations, the refrigerant quota will reduce by a further 24% from January 2027. This is expected to place additional pressure on the price and availability of commonly used HFC refrigerants such as R448A and R449A.

For businesses operating commercial refrigeration systems, now is the time to develop a long-term refrigerant strategy and begin transitioning towards future-proof low GWP and natural refrigerant solutions.

What are F-Gas Regulations in Refrigeration?

F-Gas regulations govern the use of fluorinated gases commonly used in refrigeration systems such as hydrofluorocarbons (HFCs). These refrigerants are effective, but they have a high environmental impact if released into the atmosphere. The regulations apply across:

  • Commercial refrigeration systems.
  • Industrial cold storage.
  • Transport refrigeration units.
  • Air conditioning and heat pump systems.

The objective is clear. Reduce emissions, improve containment and accelerate the shift towards low GWP refrigerants. For operators, this means greater accountability for how refrigeration systems are installed, maintained and eventually replaced.

The HFC Phase-Down and Refrigerant Restrictions

A key part of F-Gas regulations in the UK is the gradual reduction in the availability of HFC refrigerants. This phase-down is driving significant change across the refrigeration industry.

  • HFC use is being reduced in stages through to 2030.
  • High GWP refrigerants such as R404A are being increasingly restricted.
  • New systems are moving towards lower GWP or natural refrigerants.

For many businesses, this creates a tipping point. Continuing to run older systems can lead to rising refrigerant costs, limited availability and increased maintenance challenges.

This is why F-gas compliant refrigeration systems are becoming the standard, rather than the exception.

F-Gas Compliance Requirements for Refrigeration Systems

F-gas compliance in refrigeration is not just about refrigerant choice. It also covers how systems are managed throughout their lifecycle.

  • Leak Detection - regular checks are required based on system size and CO₂ equivalent thresholds.
  • Record Keeping - detailed logs must be maintained for servicing, refrigerant use and repairs.
  • Certified Engineers - only qualified personnel can carry out installation and maintenance.
  • Refrigerant Recovery - gases must be properly recovered and handled at end of life.

These requirements apply across both commercial and transport refrigeration systems. Non-compliance can lead to fines, operational disruption and reputational risk.

F-Gas Regulations in Transport Refrigeration

F-Gas regulations also apply to transport refrigeration, particularly for larger vehicles and fleet operations. Operators must ensure:

  • Systems are regularly maintained and leak tested.
  • Certified engineers carry out all servicing.
  • Refrigerant use is properly recorded.

At the same time, the transport sector is under additional pressure to reduce emissions. This is accelerating the shift towards electric refrigeration units and low GWP alternatives, especially for urban and last-mile delivery.

For fleet operators, F-gas transport refrigeration compliance is now closely linked to wider sustainability targets.

Low GWP Refrigerants and Future-Proof Systems

As F-Gas regulations tighten, the industry is moving towards low GWP refrigerants and natural alternatives. Common options include:

  • CO₂ (R744) - widely used in commercial refrigeration with ultra-low GWP.
  • Propane (R290) - efficient and suitable for smaller systems.
  • Ammonia (R717) - used in large industrial applications.

Lower GWP synthetic refrigerants, including A2L options such as R32 and newer blends, are also used as transitional solutions where appropriate.

For businesses, adopting low GWP refrigeration systems is not just about compliance. It supports long-term cost control, improved efficiency and reduced environmental impact.

Future-Proofing Your Refrigeration Systems

F-Gas regulations are only moving in one direction. Stricter controls, lower GWP thresholds and continued pressure to reduce emissions. This means refrigeration systems should now be:

  • Designed with low GWP refrigerants from the outset.
  • Easy to maintain in line with compliance requirements.
  • Aligned with future regulatory changes.
  • Reviewed to see where A2L refrigeration systems may offer a practical step towards compliance.

Taking a proactive approach helps avoid reactive upgrades, rising costs and disruption to operations.

The Role of A2L Refrigerants in F-Gas Compliance

A2L refrigerants are becoming an increasingly important part of the transition away from high GWP HFCs. These refrigerants offer significantly lower global warming potential compared to traditional options, whilst maintaining performance levels suitable for many commercial applications.

Classified as mildly flammable, A2L refrigerants such as R32 and newer blends are being adopted across a range of refrigeration systems where natural refrigerants may not be the right fit. Their role in F-gas compliant refrigeration is clear:

  • Lower GWP than legacy HFC refrigerants.
  • Improved energy efficiency in certain applications.
  • Suitable for retrofit or new system designs in some cases.

However, their use comes with additional considerations. System design, installation standards and safety requirements must be carefully managed, particularly around ventilation and handling.

For many businesses, A2L refrigeration [Link: https://www.hubbardproducts.com/product/a2l-condensing-units] provides a practical route to reducing environmental impact whilst maintaining operational performance.

Get in Touch

If you are reviewing your systems in line with F-Gas regulations, or looking to move towards low GWP refrigeration solutions, Hubbard can support you with compliant, future-ready systems.

Please contact our specialist team to discuss the right approach for your business.

Share on...